Premium Tile Adhesive
TELLABOND MASTER
TELLABOND MASTER
Tellabond Master is a premium tile adhesive with non-shrink particles that provides high bond strength.
Tellabond Master is a premium tile adhesive with high bond strength. It is enriched with special active polymers and is a polymer-modified, grey cement-based thin-set tile adhesive for fixing high porosity tiles like ceramic and clay tiles, terracotta, and quarry tiles of regular size.
It is non-shrink in nature with high bond strength which creates perfect bonding strength for fixing high porosity tiles like ceramic or clay tiles, terracotta, and quarry tiles of regular size. They are perfect for different kinds of surfaces on all floors. Works very well for tile-on-tile application for most repair and rehabilitation work.
Features & Benefits
 | High water resistance & ease of application |  | Fast setting & superior peel- off strength |  | Zero Wastage and easy to apply |
 | Non shrink & adhesion properties |  | High bonding strength & adhesive |  | Economical and time saving |
Tellabond Master Advantages
ORDINARY TILE ADHESIVE | TELLABOND MASTER |
|---|---|
⛔ Seepage & discolouration is possible | ✅ Resistant to seepage & discolouration |
⛔ Chipping required | ✅ Can be used directly on any surface |
⛔ Not water resistant | ✅ Water resistant |
⛔ Adds more weight and thickness | ✅ Lesser structure weight & thickness |
⛔ Requires bed thickness 20 - 30 mm | ✅ 3 - 6 mm thickness adequate mostly |
⛔ Hollowness problems | ✅ Hollowless tile & substrate |
⛔ Very low bond strength | ✅ High bond strength |
⛔ Poor water retention | ✅ Good water retention |
⛔ Short open time and adjustability | ✅ Adequate open time and adjustability |
⛔ Typical application | ✅ Easy to apply |
⛔ Poor workability | ✅ Good workability |
⛔ Curing required | ✅ Curing not required |
⛔ Slow fixing | ✅ Faster fixing |
Technical Information
Parameter | Results |
|---|---|
Appearance | Cementitious Free Flow Grey Powder |
Pot Life | >100 Minutes |
Open Time, Minutes | 15-20 |
Adjustibility | 20 Minutes |
Slip Test | ≤ 0.5 mm |
Coverage | 2.85 - 3.00 sq. ft./kg |
Quality & Standards
Tensile Adhesion
(Dry Conditions)
Shear Adhesion
(Dry Conditions 24 Hrs.)
Tensile Adhesion
(Wet Conditions)
Shear Adhesion
(Dry Conditions 14 Hrs.)
Exceeds the requirements of IS 15477:2019 Type 1T
Complies to requirements of ANSI A118.1T and EN/ISO: C1T
Shear Adhesion
(Heat Ageing Conditions)
Shear Adhesion
(Wet Conditions)
Health & Safety Precautions
-
Though it contains non toxic materials but still care should be taken to avoid dust inhalation while mixing and handling
-
People allergic to cement products should take precautions before use
-
In case of contact with eyes wash with plenty of water
-
Keep out of reach of children
Method of Application
