Premium Block Jointing Mortar
INSTAMORTAR
INSTAMORTAR
Instamortar is our premix high quality mortar for jointing & bonding of all types of substrate like AAC Blocks, Concrete Blocks, Hollow Blocks & Bricks.
It consists of cement, graded sand and specialized polymers which combine to give superior strength, water retention, and stability.
It replaces the conventional method and material of jointing mortar which requires a 12-18 mm thickness, with a revolutionary 2-3 mm joint thickness, and only requires the addition of water before application to prepare the product for use.
Features & Benefits
Thinner jointing with high adhesion gives better quality and output of overall masonry work. |
Factory-made products with consistent quality. |
No water curing is required at site |
Ready to use, only clean water to be added at site |
Better bond than conventional cement-based mortar |
Negligible wastage |
Economical |
Instamortar Advantages
Technical Information
Parameter | Product Specification | Reference Standard |
|---|---|---|
Appearance and Color | Free flowing and see grey in color | … |
Sand Size (microns) | less than 600 | 1S 383 -2018 |
Dry Density (Kg/m3) | 1650-1750 | … |
Wet Density (Kg/m3) | 1850-1950 | … |
Water Demand (l / 50 kg Bag) | (12 l to 14 l) 24-28 % | … |
Bed / Joint Thickness (mm) | 2 to 3 | … |
Pot Life (min) | 90-120 | … |
Adjustment Time (minutes) | Up to 20 | … |
Mixing Time (minutes) | 03/Jul | … |
Hard Dry (Hrs) | 24 | … |
Coverage Area sq. ft. | 155.175 | As per good practice |
4" AAC Block Wall (sq. ft. /50 kg bag) | 155.175 | As per good practice |
Coverage Area sq. ft. | 110.13 | As per good practice |
6" AAC Block Wall (sq. ft. /50 kg bag) | 110.13 | As per good practice |
Compressive Strength (MPa @ 28 Days) | >12 | EN 1015-11 |
Tensile Adhesion Strength (MPa @ 28 Days) | ≥0.8 | EN 1348 |
Splitting Tensile Strength (MPa @ 28 Days) | ≥0.5 | ASTM C 1660-09 |
Self-Curing | Yes | ... |
Quality & Standards
Tensile Adhesion
(Dry Conditions)
Shear Adhesion
(Dry Conditions 24 Hrs.)
Tensile Adhesion
(Wet Conditions)
Shear Adhesion
(Dry Conditions 14 Hrs.)
Exceeds the requirements of IS 15477:2019 Type 1T
Complies to requirements of ANSI A118.1T and EN/ISO: C1T
Shear Adhesion
(Heat Ageing Conditions)
Shear Adhesion
(Wet Conditions)
Health & Safety Precautions
-
Though it contains non toxic materials but still care should be taken to avoid dust inhalation while mixing and handling
-
People allergic to cement products should take precautions before use
-
In case of contact with eyes wash with plenty of water
-
Keep out of reach of children
Method of Application
